GX-K Series Top Pan Waterproof Balances

High capacity top loading balances featuring high speed weighing and settling times. The GX-K series features internal calibration. trade Approved. Multiple weighing units including counting and percentage are available.
PLEASE NOTE The Trade Approval capacities and resolutions table is at the bottom of this page.

Product Brochure & Manual


  • Dust and moisture protected to IP-65 level
  • New patented weighing mechanism Super Hybrid Sensor (SHS)
  • Trade Approved by NMI Australia
  • Industry leading 5 years warranty
  • Ultra Fast response speed – typically just one second
  • Standard RS232C serial data interface
  • Rugged aluminium alloy enclosure
  • Multiple weighing units plus counting, percentage and user programmable
  • Wide range of capacities, to 31kg, and resolutions to 0.01g
  • Built in under hook capability
  • Counting has A.C.A.I. feature for optimum results
  • Overload protected to take hard use
  • GLP data output format to suit quality systems.

Additional Information


When a balance receives a certificate of approval from NSC/NMI it will be approved under a certain class of accuracy which determines the parameters that the machine needs to meet when submitted for trade stamping.

One of the key parameters that will apply is the verification interval which is the minimum increment that the balance can be approved to. Given the high number of divisions displayed by a balance the verification interval for trade will always differ from the best increment of the balance. An example would be in the case of the GX-2000 where the balance can be read to 0.01 g but the verification interval when the machine is stamped for trade is 0.1 g.

Most of the balances will still display the non significant digit, normally highlighted by a bracket or similar, but some balances such as the Class III EK-i will drop the last digit completely, while the EW-150i drops an entire range. It is important to remember that the verification digit is the one to which the balance is certified, to make things clearer we have listed the trade approved balances below complete with their approval accuracy class and verification digit.

Model & Capacity

Model Capacity Weighing Pan Unit Price
excluding GST
GX-8K Trade
8100g x 0.1g
270mm x 210mm $ POA Enquire
GX-10K Trade
10100g x 0.1g
270mm x 210mm $ POA Enquire
GX-20K Trade
21000g x 1g
270mm x 210mm $ POA Enquire
GX-30K Trade
31000g x 1g
270mm x 210mm $ POA Enquire
GX-8K Non Trade
8100g x 0.01g
270mm x 210mm $ POA Enquire
GX-8K2 Non Trade
8100g x 0.1g/0.01g
270mm x 210mm $ POA Enquire
GX-10K Non Trade
10100g x 0.01g
270mm x 210mm $ POA Enquire
GX-12K Non Trade
12000g x 0.1g
270mm x 210mm $ POA Enquire
GX-20K Non Trade
21000g x 0.1g
270mm x 210mm $ POA Enquire
GX-30K Non Trade
31000g x 0.1g
270mm x 210mm $ POA Enquire
GX-32K Non Trade
31000g x 1g/0.1g
270mm x 210mm $ POA Enquire

Accessories & Options

Accessories & Options Description Unit Price
excluding GST
GX-K/F OP-04 Comparator Output with Buzzer/RS232C/Current Loop output $ POA Enquire
GX-K/F OP-06 Analogue Output /Current Loop output $ POA Enquire
GX-K/F OP-07 Waterproof RS232C cable $ POA Enquire
  • Product Enquiry
  • Help & FAQ
  • Warranty
  • Submit a Product Enquiry

    For enquiries outside of Australia & New Zealand, please see the list of A&D Global contacts

    Please complete the fields below

    * Required field
  • Where can I purchase this equipment?

    A&D Australiasia has a nation wide dealer network with outlets in all capital cities and in most regional locations. Call Toll Free 1800 241 434 for the location of your nearest dealer.

    My product requires service/repair, how do I arrange this?

    Contact the A&D Australiasia Service department on 08 8301 8120 or at service@andaustralasia.com.au and they can advise on and coordinate your service requirement.

  • All A&D products purchased within Australia are covered by a warranty period which varies from 12 months to 5 years depending on the model.

    Warranty covers against any defects in the material and workmanship negligence during the manufacture or assembly of the product for the period of the warranty.

    Warranty claims should be submitted through your initial dealer or place of purchase with your proof of purchase tax invoice.