AD-4212F High-Capacity Weighing Sensor Modules
The AD-4212F series of high-capacity weigh modules represents a valuable addition for system integrators. Offering a thoughtful design, precision, and innovative features, these weigh modules deliver solutions that simultaneously streamline and expand the horizons of their work. With A&D’s cutting-edge technologies and software, the AD-4212F series also significantly broadens the design possibilities for system integrators!
Features
- Space-saving with an integrated A/D converter that enables direct connection to a PC/PLC
- IP65 dust and waterproof for protection from spillage of powder or liquid materials
- Fast stabilization of approx. 0.5 seconds (typical) for up to 300 g excluding tare for the AD-4212F-10202 and AD-4212F-22001
- Smart-range function that provides a readability of 0.001 g for up to 510 g even after tare has been performed for the AD-4212F-6203D
- Adaptable to a user-designed, special weighing pan/jig
- Impact shock detection (ISD) to prevent error-causing and potentially damaging impact loads to the weight sensor
- Shock logging function that records up to 50 adverse impact loads with a timestamp for later inspection
- Quick, automatic precision assessment using the electronically controlled load (ECL)
- Customizable response characteristics settings using the free dedicated software WinCT-AD4212F
- Weighing Data Simulator (WDS) that visualizes the effect of each change to response characteristics settings for comparison
- Communication interface that supports RS-485 for daisy-chain connection of multiple weigh modules
- Embedded terminating resistor
- Configurable data transmission rate by changing the baud rate
- Diverse peripherals available for conversion between RS-232C and a different interface/output
-
-
Where can I purchase this equipment?
A&D Australiasia has a nation wide dealer network with outlets in all capital cities and in most regional locations. Call Toll Free 1800 241 434 for the location of your nearest dealer.
My product requires service/repair, how do I arrange this?
Contact the A&D Australiasia Service department on 08 8301 8120 or at [email protected] and they can advise on and coordinate your service requirement.
-
All A&D products purchased within Australia are covered by a warranty period which varies from 12 months to 5 years depending on the model.
Warranty covers against any defects in the material and workmanship negligence during the manufacture or assembly of the product for the period of the warranty.
Warranty claims should be submitted through your initial dealer or place of purchase with your proof of purchase tax invoice.