WinCT Moisture Software

This software is only available with the purchase of our A&D Moisture Analysers

WinCT-Moisture is ideal software to use when measuring with either MX/MF Moisture Analyzers.

Those who work measuring the moisture content of the materials in their Lab or Factory need to know the optimum temperature to heat the samples to when measuring the moisture contents in as short a time as possible. Many try to measure the sample at several different temperatures to determine moisture content, which consumes much time and effort.

To answer this we designed the RS-Temp (OTS = Optimum Temperature Search Program) WinCT-Moisture software (Patent pending). The RS-Temp controls the MX/MF by command to heat the sample to between 100 ~ 200 degrees in 20 degrees steps for 5 minutes, then display the changing of moisture contents graph after 30 minutes, and heat and measure the moisture content then show the rating A, B, C, D, E and F in order of smaller number of the change (/min. (%)) so the rating of A or B may be the appropriate optimum temperature to heat the sample under test. The OTS RS-Temp requires only 30 minutes to test the sample with 6 different temperature settings saving you the need to spend time conducting trails to determine the correct heating temperature.

  • Product Enquiry
  • Help & FAQ
  • Warranty
    • *** GOT A QUESTION?

      Please fill in the form below.

      For enquiries outside of Australia & New Zealand, please see the list of A&D Global contacts

      Please complete the fields below

      * Required field
    • Where can I purchase this equipment?

      A&D Australiasia has a nation wide dealer network with outlets in all capital cities and in most regional locations. Call Toll Free 1800 241 434 for the location of your nearest dealer.

      My product requires service/repair, how do I arrange this?

      Contact the A&D Australiasia Service department on 08 8301 8120 or at [email protected] and they can advise on and coordinate your service requirement.

    • All A&D products purchased within Australia are covered by a warranty period which varies from 12 months to 5 years depending on the model.

      Warranty covers against any defects in the material and workmanship negligence during the manufacture or assembly of the product for the period of the warranty.

      Warranty claims should be submitted through your initial dealer or place of purchase with your proof of purchase tax invoice.