RV-10000A Tuning Fork Vibro Rheometer

Are you struggling with an expensive rheometer that only produces unstable results when testing low viscosity (e.g. below 100 mPa•s) samples? Drawing on A&D’s proven sensor technology for high- resolution analytical balances, the RV-10000A Tuning Fork Vibro Rheometer is a breakthrough alternative to conventional methods in the research of non-Newtonian fluid properties, especially for ease and precision in low viscosity measurements.

Features

  • Repeatability as high as 1% of the measured value (by S.D.) even with low viscosity sample fluids
  • Shear rate changes by controlling the sensor plate vibration amplitude
  • Easy setup/cleaning and very quick measurement (stabilization in 20 seconds)
  • Wide continuous measurement range (max. 0.3 to 25,000 mPa·s)
  • Little interference to the sample fluid
  • Possible to measure fluids in motion
  • Comes with a special controller for: Automatically changing the amplitude (shear rate) and capturing data in the manner set by the user, Real-time graphing of viscosity variation with time, temperature, as well as shear rate, Saving results (in CSV format) and graph screens (as JPEG images) in USB flash drives
  • User calibration function, including a simplified calibration using purified water
  • Sample fluid temperature control using the provided water jacket
  • Anti-corrosive, titanium sensor plates and temperature sensor

Additional Information

For information on the development story of the A&D RV-10000A Rheometer, click here

Model & Capacity

Model Capacity Weighing Pan Unit Price
excluding GST
Action
RV-10000A
Tuning Fork Vibro Rheometer (natural frequency at 30Hz)
N/A | Minimum sample 10 ml $ POA Enquire
  • Product Enquiry
  • Help & FAQ
  • Warranty
  • Submit a Product Enquiry

    For enquiries outside of Australia & New Zealand, please see the list of A&D Global contacts

    Please complete the fields below

    * Required field
  • Where can I purchase this equipment?

    A&D Australiasia has a nation wide dealer network with outlets in all capital cities and in most regional locations. Call Toll Free 1800 241 434 for the location of your nearest dealer.

    My product requires service/repair, how do I arrange this?

    Contact the A&D Australiasia Service department on 08 8301 8120 or at service@andaustralasia.com.au and they can advise on and coordinate your service requirement.

  • All A&D products purchased within Australia are covered by a warranty period which varies from 12 months to 5 years depending on the model.

    Warranty covers against any defects in the material and workmanship negligence during the manufacture or assembly of the product for the period of the warranty.

    Warranty claims should be submitted through your initial dealer or place of purchase with your proof of purchase tax invoice.