GX Series Top Pan Balances
A High precision range of top pan balances featuring optimum weighing and settling time. The GX features a standard RS232 data output, internal calibration and multiple weighing units. A percentage & counting mode is also available. PLEASE NOTE The Trade Approval capacities and resolutions table is at the bottom of this page.
Product Brochure & Manual
DownloadFeatures
- New patented weighing mechanism Super Hybrid Sensor (SHS)
- Trade approved by NMI (except for GX-800 & GX-1000)
- Industry leading 5 years warranty
- Ultra Fast response speed – typically just one second
- Standard RS232C serial data interface
- Rugged aluminium alloy enclosure
- 15 weighing units plus counting, percentage and user programmable
- Wide range of capacities and resolutions
- Built in under hook capability
- Counting has A.C.A.I. feature for optimum results
- Overload protected to take hard use
- Automatically adjusts the environmental settings to match your site
- Last digit blanking via keypad if desired
- GLP data output format to suit quality systems
- Sealed keypad gives IP-54 protection level
- One touch calibration using internal motor driven mass
- Built in animal weighing software
- Breeze break is standard with the GX-200/400/600
- Supplied with free Windows Communication Tools (WinCT) software
Additional Information
TRADE APPROVED BALANCE VERIFICATION
When a balance receives a certificate of approval from NSC/NMI it will be approved under a certain class of accuracy which determines the parameters that the machine needs to meet when submitted for trade stamping.
One of the key parameters that will apply is the verification interval which is the minimum increment that the balance can be approved to. Given the high number of divisions displayed by a balance the verification interval for trade will always differ from the best increment of the balance. An example would be in the case of the GX-2000 where the balance can be read to 0.01 g but the verification interval when the machine is stamped for trade is 0.1 g.
Most of the balances will still display the non significant digit, normally highlighted by a bracket or similar, but some balances such as the Class III EK-i will drop the last digit completely, while the EW-150i drops an entire range. It is important to remember that the verification digit is the one to which the balance is certified, to make things clearer we have listed the trade approved balances below complete with their approval accuracy class and verification digit.
Model & Capacity
| Model | Capacity | Weighing Pan | Unit Price excluding GST |
Action |
|---|---|---|---|---|
| GX-200 Trade |
210g x 0.01g
|
128mm x 128mm | $ POA | Enquire |
| GX-400 Trade |
410g x 0.01g
|
128mm x 128mm | $ POA | Enquire |
| GX-600 Trade |
610g x 0.01g
|
128mm x 128mm | $ POA | Enquire |
| GX-2000 Trade |
2100g x 0.1g
|
165mm x 165mm | $ POA | Enquire |
| GX-4000 Trade |
4100g x 0.1g
|
165mm x 165mm | $ POA | Enquire |
| GX-6100 Trade |
6100g x 0.1g
|
165mm x 165mm | $ POA | Enquire |
| GX-8000 Trade |
8100g x 1g
|
165mm x 165mm | $ POA | Enquire |
Accessories & Options
| Accessories & Options | Description | Unit Price excluding GST |
Action |
|---|---|---|---|
| GX OP-04 | Comparator Output with buzzer/RS232/Current Loop Serial | $ POA | Enquire |
| GX OP-06 | Analogue Output/Current Loop Serial | $ POA | Enquire |
| GX OP-10 | Glass Breeze Break for GX-200 to GX-1000 | $ POA | Enquire |
| GX OP-11 | Glass Breeze Break for GX-2000/4000/6000/6100/8000 | $ POA | Enquire |
| GX OP-12 | Animal weighing pan (Not suitable for GX-200) | $ POA | Enquire |
| GX OP-13 | Density Determination Kit for GX-200 to GX-1000 | $ POA | Enquire |
-
-
Where can I purchase this equipment?
A&D Australiasia has a nation wide dealer network with outlets in all capital cities and in most regional locations. Call Toll Free 1800 241 434 for the location of your nearest dealer.
My product requires service/repair, how do I arrange this?
Contact the A&D Australiasia Service department on 08 8301 8120 or at service@andaustralasia.com.au and they can advise on and coordinate your service requirement.
-
All A&D products purchased within Australia are covered by a warranty period which varies from 12 months to 5 years depending on the model.
Warranty covers against any defects in the material and workmanship negligence during the manufacture or assembly of the product for the period of the warranty.
Warranty claims should be submitted through your initial dealer or place of purchase with your proof of purchase tax invoice.